Troubleshooting Printer Brother Hl 2140

Brother Printer Hl 2140 Red Error Light

Perform the Troubleshooting Printer Brother Hl 2140 instructions given below, to resolve the Brother HL 2140 printer blinking red error light issue.

  • Initially, check if the front & fuser covers are open.
  • If so, close them. After that, check if any paper is stuck inside the printer.
  • If the paper is jammed inside the Brother HL 2140 printer, then remove it slowly using your hands.
  • Now, check if the Brother printer starts the Print operation.
  • If the Brother HL 2140 printer does not start the print operation, press the Go button on the printer display, and perform the instructions displayed on the printer screen.
  • After that, check if the memory space is full.
  • If so, remove some data from the storage and check if the error light stops blinking.
  • Check if the print overrun issue has occurred on your Brother printer.
  • If so, you can not perform the Print operation on your Brother HL 2140 printer.
  • If the issue persists, then contact the Brother printer technical support.

Brother Hl 2140 Paper Keeps Jamming 

To fix the paper jam issue on your printer, go with the Troubleshooting Printer Brother Hl 2140 steps given below.

  • Lift the front door of the Brother HL 2140 90 printer.
  • Slowly, take the drum unit and the toner cartridge assembly out of the Brother HL 2140 90 printer and keep it aside.
  • Check the assembly and if you find any paper piece stuck inside, try to remove it.
  • Use your hands to remove the jammed paper from the assembly.
  • Now, check the paper tray and make sure there is no paper jammed inside it.
  • Pull the paper or main tray out of the printer, and check if any paper is jammed inside.
  • If you find any, pull the jammed paper out of the tray and push the tray into the Brother printer.
  • After removing all the jammed paper, replace the drum unit and the toner cartridge assembly into the Brother HL 2140 printer.
  • Then, close the opened front door of the Brother HL 2140 printer and try a test print.

Brother Hl 2140 Printing Blank Pages

To fix the Brother HL2140 printer printing blank pages issue, go with the instructions given below.

  • First, check if the issue is with your printer hardware or software. To check it, perform a copy operation on your Brother HL 2140 printer.
  • Place a document or photo in the Automatic Document Feeder of the Brother printer and press the Copy button.
  • If the printer prints the blank page, then the problem is with the Brother HL 2140 printer’s hardware.
  • If the Brother HL 2140 printer prints the copy of the document, then the issue is due to incorrect settings. To fix this issue, perform the troubleshooting Printer Brother Hl 2140 steps given below.
  • Adjust the Brother HL 2140 printer driver settings on your Windows or Mac system.
  • On your Windows system, navigate to the Brother HL 2140 printer folder and right-click on it.
  • Select the Properties option. Now the Properties dialog box will appear on the screen.
  • Click Advanced PRINT PROCESSOR WINPRINT Default Data Type RAW OK.
  • Make sure to uncheck the Keep printed document option on the Advanced tab.
  • Click the Apply button followed by OK.
Troubleshooting Printer Brother Hl 2140
  • Now, try test print on your Brother HL 2140 printer by clicking the PRINT TEST PAGE option on the General tab.
  • If the printer prints the copy document correctly, then the troubleshooting Printer Brother Hl 2140 issue is resolved.
  • If it doesn’t, then uninstall and re-install the Brother HL 2140 printer driver on your Windows system.

Brother Hl 2140 All Lights Flashing

If all the lamps are flashing on the Brother HL 2140 printer, then try to follow the Troubleshooting Printer Brother Hl 2140 procedures given below.

  • Turn off your Brother HL 2140 printer and wait for a maximum of five seconds.
  • Then, switch on your Brother HL 2140 printer and check if the issue is resolved or not.
  • If not, then again switch off your Brother HL 2140 printer.
  • After a while, press & hold the Go button while pressing the Power key.
  • As soon as the Toner light starts to blink, release the Go button.
  • After a few minutes, press & hold the Go button again.
  • Now, release the Go button when the Paper light starts to blink.
  • Check if the issue is resolved. If not, then contact our technical experts to fix the issue.

Brother Hl 2140 Not Printing   

To fix the Brother HL 2140 printer not printing issue, perform the instructions given below.

  • Check and make sure that the Brother HL 2140 printer is turned On and the power light is blinking on the device control panel.
  • Check if the Brother HL 2140 printer is connected to your Windows or Mac system.
  • Check if the Brother printer is reset as the default printer on your Windows or Mac system.
  • Cancel all on-going print jobs and try it later. To do it, perform the instructions given below.
  • Go to the Devices & Printers section on your Windows system.
  • Select & right-click on your Brother HL 2140 printer, and click the See whats’ printing option.
  • Click the Printer tab and select the Cancel All Documents option.
  • If the printer offline issue continues, then contact our technical experts for remote assistance in resolving the Troubleshooting Printer Brother Hl 2140 issue.