Brother MFC J690DW Setup

Brother MFC J690DW Setup

Brother MFC j690dw Printer Setup

  • Open the seal of the Brother MFC J690DW printer and remove all the packing materials. 
  • Place the Brother printer on a flat surface and connect it to the power supply using a power cord. 
  • Turn on the Brother J690DW Setup and then install the toner cartridge. 
  • Unpack the toner cartridge carefully. Take the drum unit out of the Brother printer. 
  • Position the toner cartridge in the drum unit and place it in the printer. 
  • Take a test print after you install the toner cartridge in the Brother printer. 
  • Now, download the drivers from the official site and install it on your system.

Brother MFC J690DW Driver

You can download the Brother full driver package for your Brother J690DW printer from the official site. Brother MFC J690DW Setup and Install it and connect your device to the Brother printer.

Brother MFC J690DW Driver Download

  • To download the full driver package, you have to navigate to the official site. 
  • Specify the OS Family and the OS version on the Downloads page. 
  • Click the OK button to display the driver and the list of software available for your Brother J690DW printer. 
  • Click the Download button available near the Full Driver Package option to save the Brother printer driver to your system. 

Brother MFC J690DW Mac Driver

  • The Brother J690DW printer can be connected to the Mac system. 
  • Specify Mac as the OS Family and then specify the OS version correctly. 
  • Use the Download button to save the drivers to your Mac system. 
  • Proceed to the Brother MFC J690DW Setup and installation process once the download is over.

Brother MFC J690DW Wireless

  • Make use of the instructions displayed here to perform the wireless setup process of your Brother MFC J690DW printer. 
  • Tap the Settings option and then go with the All Settings option. 
  • Choose the Network option followed by the WLAN option. Tap the WPS w/PIN Code option. 
  • Press the Yes button when the Enable WLAN? message appears on the control panel’s screen. 
  • An 8-digit PIN will be displayed on your printer’s LCD. 
  • Make a note of it. Now, open the default web browser on your computer.
  • Key in the IP Address of the route and tap the Enter button. 
  • Make sure the computer from which you are accessing the web interface page of the router is connected to the network. 
  • Navigate to the WPS Settings page and specify the PIN correctly in the appropriate field. Follow the prompts displayed on your screen. 
  • Next, open the Control Panel window and then select the Hardware and Sound option. 
  • Tap the Add Device option and choose your Brother J690DW printer from the list. 
  • Mention the 8-digit PIN and click the Next button. 
  • The Brother MFC J690DW Setup wireless setup process is now complete.

Brother MFC J690DW USB Setup

Make use of the instructions that are mentioned here to perform the USB setup process.

  • Check if you are logged in to your system as an administrator.
  • Double-click the downloaded Brother printer driver file and then click the Install MFL-Pro Suite option. 
  • Accept the terms and conditions of the License Agreement by clicking the Yes option. 
  • When the Brother MFC J690DW Setup connection method screen appears, choose the Local Connection (USB) option.
  • Once the USB cable plug-in prompt appears, connect the Brother J690DW printer to the computer using a USB cable. 
  • Wait until the installation is complete and then click the Finish button.
  • Now, you have to restart your system. Assign a test print job to the printer after the system turns on.

Brother MFC J690DW Mobile Printing

Make use of the mobile printing apps available for your Brother J690DW printer to assign print and scan jobs from your mobile device to the printer. Your Brother printer and the device should be connected to the same wireless network before delegating print jobs. 

Brother MFC J690DW Troubleshooting

When you face any issue with the Brother MFC J690DW printer, you have to rectify it to bring the printer back to the normal state. You can go with the instructions available here to resolve those Brother MFC J690DW Setup issues. 

Brother Genuine MFC J690DW Not Printing

  • Check if your printer is in the sleep mode. If yes, tap the Power button of the Brother printer to wake it up. 
  • Check if it is connected properly to the power source. 
  • Also, check the connection between the computer and the Brother J690DW printer. Reconnect them if required. 
  • Make sure you have selected your Brother printer while assigning a print job. 
  • Restart the Brother J690DW printer and check if the issue has been resolved. 
  • Check the toner level in the cartridge. Replace the Brother toner cartridge with a new one to sort out this Brother MFC J690DW Setup issue. 
  • If connected via a wireless network, then check if the Brother J690DW printer and computer are connected to the same network. 
  • Finally, check if the printer is in the offline mode. If yes, then navigate to the control panel and change the status of the Brother machine to Online.