Brother HLL3290cdw Quick Setup Guide

brother-hl-2270dw setup

Brother HLL3290cdw Quick Setup Guide

  • First, remove the packing materials from the Brother HL-L3290CDW printer.
  • Peel off all the blue tapes present inside and outside the printer.
  • Next, install the drum unit and the toner cartridge in the Brother HL-L3290CDW printer.
  • Move the drum locks to one side and take it out. Remove the orange protective part available on each cartridge.
  • Insert it in the respective slots and close the top cover.
  • Retract the input tray of the Brother machine and adjust the paper in the input tray after placing it.
  • Use the power cord to attach the Brother HL-L3290CDW printer to the power source.
  • Turn on the Brother printer and set the preferences.

Brother Hll3290cdw Driver

You can download the Brother printer driver from the official site. Enter the OS Version and find the correct drivers. Tap the Driver Download button. After the download is complete, proceed to the setup process.

Broter HLL3290CDW Toner

It makes use of four toner cartridge and a drum to print or copy your documents. Proceed with the instructions specified below to replace the toner cartridges.

How To Change Brother Hll3290cdw Toner

  • Check if the Brother HL-L3290CDW printer is turned on and then raise the top cover. Make sure that you lock it in the open position.
  • Uninstall the toner cartridge and the drum unit assembly from the Brother printer.
  • Remove the Brother toner cartridge from the drum unit using the green lock lever.
  • Unwrap the new toner cartridge from its packet and take off the protective cover.
  • Place the new cartridge in the drum unit and push it until you hear a clicking sound.
  • Move the sliding tab from one side to another to clean the corona wire.
  • Position the toner cartridge and the drum unit in the Brother HL-L3290CDW printer. Close the top cover of the Brother printer and take a test print.

Brother Hll3290cdw Wireless Setup

Make use of the instructions stated below to perform the wireless setup process.

  • Tap the Menu option followed by the Network option.
  • Select the WLAN option and then choose the WPS option.
  • Turn on the Wireless Network feature when the WLAN Enable message appears on the control panel’s screen.
  • The wireless setup wizard will now begin the process. When the Press Key on Rtr message appears, you have to press the WPS button available on your router.
  • Make sure to tap the WPS button within two minutes.
  • The Connected message appears once the wireless setup process is over.

Brother Hll3290cdw Scan Setup

  • For scanning with your Brother HL-L3290CDW printer, you have to download and install the Brother printer driver on your system.
  • Make sure the Brother machine and the device are connected properly.
  • There are apps such as AirPrint, Google Cloud Print, iPrint & Scan, and more for scanning your documents or images.
  • Once you have installed any one of the apps, you can assign scan jobs from your mobile device.
  • If you have installed the drivers, then you can scan from your computer using ControlCenter.

Brother Hll3290cdw Duplex Printing

  • With the help of the procedure given here, print your documents or images on both sides of the paper.
  • Ensure that the Brother HL-L3290CDW printer and computer are connected to each other.
  • Search for the document or file you wish to print and open it. Go to File and choose the Print option.
  • When the print dialog box appears, go to the Basic tab. Select the 2-Sided option from the 2-Sided/Booklet drop-down list. Choose the binding side in the next step.
  • Modify any other print settings if required and tap OK.
  • The document or images that you choose will be printed on both sides of the paper.

Brother Hll3290cdw Troubleshooting

The troubleshooting instructions that are specified below will help you resolve any problems that occur with your Brother HL-L3290CDW printer.

Brother Hll3290cdw Not Printing

The Brother HL-L-3290 printer may not print due to ink cartridge issues, incompatible print media, incorrect print settings, outdated driver, or connection issues. In order to avoid printing issues, have a regular check on the ink cartridges and replace them once they become low on ink or empty. Also, use only recommended print media to print your data. Keep your printer driver updated and clear the print queue if you see the print jobs stuck. If none of the solutions work out, reset the printer, reconfigure it, and try printing.

Brother Hll3290cdw Printing Blank Pages

  • If the Brother machine prints blank pages, then check if the toner cartridge has run out of toner.
  • Verify the levels of the toner and then replace them using the below-specified instructions.
  • Open the top cover of the Brother printer and remove the cartridges and the drum unit.
  • Take off the toner cartridge from the drum unit and place it aside. Open the new cartridge and position it firmly in the drum unit.
  • Place it back into the Brother HL-L3290CDW printer and close the top cover properly.
  • Take a test print to check if the issue has been resolved.

Brother Hll3290cdw Paper Jam Error

  • You have to check for paper jam in the:
  • 1. Output paper tray
  • 2. Manual feed slot
  • 3. Paper tray
  • 4. Rear of the machine
  • 5. Inside the machine
  • 6. Paper tray
  • Check all these places one after the other for a paper jam. If you see any paper stuck, then pull it out gently using both your hands.
  • Discard the paper and then take a test print to ensure that the Brother printer is working properly.

Brother Hll3290cdw Poor Print Quality

  • Check which toner cartridge is creating the issue and replace it if required.
  • Make use of lint-free cloth to wipe the scanner bed of the Brother HL-L3290DW printer.
  • The next step is to clean the four corona wires of the printer. Raise the top cover to access the wires and clean them by sliding the green bar from one end to another.
  • Check if the Toner Saver mode is enabled. If so, disable it and then try printing.
  • Modify the print resolution if the error does not resolve completely.
  • Finally, check the media type settings and the printer driver settings match properly.

Brother Hll3290cdw Not Connecting To Wifi

  • First, check if you have turned on the router. If not, turn it on.
  • In case you have connected it via a wireless network, then verify if the Brother printer and the computer are connected over the network.
  • For a USB connection, check if the cable is attached firmly between both the devices.
  • Also, check if the Brother HL-L3290CDW printer is in the ready state. If not, press the Power button to wake it up.
  • Check if you have installed the printer driver completely. Uninstall the driver and install it after a few minutes if it is not properly installed.
  • Check if you have entered the network key correctly. Specifying the wrong network key will not let you connect.
  • If the issue persists, then get help from our technical experts and get the issue fixed in no time.