Brother HL L8360CDW Setup

Brother HL L8360CDW Setup

Brother HL L8360CDW Setup

These are the guidelines to the Brother HL L8360cdw setup printer for first-time use.

  • Cut through the tape on the top surface of the Brother HL L8360CDW printer carton. Pull the flaps back to gain access to the contents.
  • There is a small cardboard box on the top. It contains the Brother printer’s power cable. Open the box’s top cover to remove the user guide and the driver CD.
  • Take the styrofoam package from the sides of the Brother printer. Lift the Brother printer out of the carton. Peel off the tapes holding the Brother printer’s lids in place.
  • When facing the printer, press the button which is located towards the right-hand-side on the top surface and open the front cover. Grab the green handle and pull the cartridge tray out. Remove the orange tape from the cartridge tray. Peel away the blue tapes from this unit as well. Detach the long orange plastic components from the left and right sides of the print cartridge slot. Push the print cartridge tray back into the Brother printer. Close the front cover.
Brother HL L8360cdw Wireless Setup
  • Remove the paper input tray from the bottom compartment. Remove the blue tapes and detach the test paper from the tray. Discard the desiccant packet. Reinstall the Brother printer’s paper input tray. This concludes the unboxing and setup of the Brother HL L8360CDW printer.

Brother HL L8360CDW Driver Download

To download the Brother HL L8360 CDW printer driver, follow these guidelines.

  • Go to the Brother printer’s official site. Navigate to the appropriate region and click on it.
  • Click on the Downloads button.
  • Select the Color Fax MFC option and then click on the HL-L8 button.
  • Click on the appropriate printer model. Select the operating system and click on the appropriate version of the OS. Click OK.
  • Select the Full Driver package by clicking it.
  • Scroll down, and click on the ‘Agree to the Eula and Download’ button.

Brother HL L8360CDW Manual

To download the HL L8360 CDW manual to your computer, you can follow the guidelines mentioned below.

  • Go to the Brother printer’s official website and click on the appropriate geographic region.
  • Click the Manuals button after ensuring that Support & Downloads is mentioned on the left-hand side of the page. Click Manuals.
  • Scroll down and click Color Fax MFC.
  • Select the MFC-L8 series button. Click on the appropriate printer model.
  • Select the Basic User’s Guide or Advanced User’s Guide option. Click the ‘Click to choose’ button on the right to view the languages in which the manual is available.
  • lick the Download button beside the appropriate language and save the manual to your computer.

Brother HL L8360CDW Wireless Setup

Before reading the guidelines mentioned below to set up your Brother HL L8360 printer wirelessly, make sure that you have the router’s Wi-Fi SSID and password at hand.

  • Power on the Brother HL L8360 printer and wait until it initializes.
  • Go to the Brother printer’s control panel and touch Wi-Fi on the LCD.
  • Select Brother HL L8360cdw setup Wizard by touching it.
  • The Wi-Fi SSIDs are now displayed on the Brother device’s LCD.
  • Tap on the appropriate Wi-Fi SSID and tap OK.
  • Key in the Wi-Fi passphrase by using the on-screen keyboard and tap OK.
  • The Connecting LAN screen appears on the Brother printer’s LCD. When the connection is established, the ‘Connected’ screen appears. Tap OK.
  • Insert the Brother HL L8360 device’s driver CD into your computer or double-click the downloaded Brother driver on your computer.
  • Select the language on the Brother driver installer screen and click Next.
  • Click the checkbox beside the license agreement clause and click Next.
  • Select the Wireless Network Connection radio button and then choose Next.
  • Pick your Brother printer from the list and then click Next.
  • Click on the Standard radio button and select Next.
  • Choose the Brother Registration button to go to the browser and then enter your Brother account details. Click Login.
  • Return to the Brother driver installer screen and click Finish. This completes the procedure to connect the Brother HL L8360cdw setup to the computer wirelessly.

Brother HL L8360cdw Toner Reset

Brother HL-L8360CDW uses toner cartridges to print your documents or images. You have to Brother HL L8360cdw setup and install the cartridges correctly in order to print successfully. You have to reset the toner when it faces any issue. Do so by following the procedure given here.

  • Access the Main Menu of the Brother HL-L8360CDW printer.
  • Lift the front cover of the Brother printer. Press the Back button and the Cancel button simultaneously.
  • After a few seconds, the Reset menu will be displayed on your screen. Select the color cartridge that you wish to reset.
  • ait till the reset process is carried out. The Accepted message will be displayed once the reset process is over.
Brother HL L8360cdw toner

Brother HL L8360cdw Troubleshooting

Troubleshoot your Brother printer using the guidelines that are given here. Rectifying the issues will help your printer function normally. The solution to all your Brother HL L8360cdw setup issues is specified here.

Brother HL L8360CDW Paper Jam Issue

  • There are many places in a Brother printer where the paper jam may occur. Clear the paper jam using the instructions given below.
  • If the paper is stuck in the paper tray, then pull it out slowly without tearing it.
  • Load papers after clearing the paper jam. Ensure that the papers are stacked only till the paper mark.
  • In case the paper is stuck inside the Brother printer, you have to open the front cover by pressing the Release button.
  • Take the drum unit out of the Brother printer, if there is any paper stuck there, then remove and discard it slowly.
  • Place the drum unit in its position and close the front cover.
  • Check other places such as the rear side of the printer, in the MP tray, and beneath the cartridges, and clear any torn paper bits found. For guide on Brother HL L8360cdw setup connect with our tech team.

Brother HL l8360cdw Paper Feed Issue

  • To fix the Paper feed issue on your Brother HL L8360CDW printer, follow the troubleshooting tips given below.
  • Check the paper tray. Make sure that the paper tray contains enough paper.
  • Make sure the back and front covers are closed properly.
  • Use only U.S or A4 paper to avoid feeding or printing issues.
  • If the print output paper is curled, then select the Reduce Paper Curl mode option in the printer driver setting.
  • Now, try to print. If the issue continues, then select the Plain Paper option in the Media Type Settings section.
  • Click the OK button. If you want to print an envelope, then select the Envelope Thin option in the Media Type Settings section.
  • Make sure to remove the paper from the main tray after the print operation.
  • If the paper is stored in the tray for a long period of time, then there is a chance for the paper to get damaged.

Brother HL l8360cdw Not Connecting to Network

  • To fix the Brother HL L8360CDW printer not connecting to the Network issue, follow the on-screen Brother HL L8360cdw setup instructions given below.
  • If the security settings are not correct, then use the using the Wireless Setup Helper Utility feature.
  • To download the utility feature, go to the official page of the Brother printer and download it.
  • Place the Brother printer and the computer system within the range of the wireless router to avoid low connectivity issues.
  • Make sure that the Brother printer and the computer are connected to the same wireless network.
  • If the wireless connection issue continues, then remove and reinstall the printer driver.
  • Try restarting your devices; printer, router, and computer.

Brother HL l8360cdw Printer Offline Issue

To factory reset the Brother HL L8360CDW printer, follow the instructions.

  • To troubleshoot the Brother HL L8360CDW printer offline issue, follow the instructions given below.
  • Check & make sure that there is no error message displayed on the printer screen.
  • If displayed, try to identify it and perform the troubleshoot tips given in the Brother printer user guide.
  • Check and make sure that the Brother HL L8360CDW printer is connected to the computer through a wired or wireless network.
  • Check if the Brother printer is set as the default printing source on your computer.
  • Go to Control Panel, and select the Hardware & Sounds option followed by Devices & Printers.
  • If a green circle with a white tick-mark is found near the printer name, then it means that it is set as the default printer on your computer.
  • Reset the printer settings and check if the Brother HL L8360cdw setup issue is resolved.

Brother HL l8360cdw Can’t Print

  • To troubleshoot the Brother HL L8360CDW printer, not printing issue, follow the instructions given below.
  • Stop the print job and clean the printer memory.
  • Wait for a while, and then send the print job to the printer.
  • Check and make sure that the paper is fed properly into the Brother printer.
  • If the paper tray is full or overloaded, then remove some papers from the tray.
  • If the Brother HL L8360cdw setup, printer fails to feed the envelopes, then load envelopes in the MP tray.
Brother HL L8360cdw Troubleshooting