Brother HL L6200DW Setup

Brother HL L6200DW Setup

Brother HL L6200DW Printer Setup

Perform the below-specified instructions to Brother HL L6200DW Setup.

  • First, unpack the Brother Printer. Cut the seal and take the printer out of the box.
  • Remove all the packing materials present around and inside the printer and discard it.
  • Unpack the Drum Unit and Toner Cartridge assembly and install them properly.
  • Remove the input tray from the printer and load papers into it. Do not place papers above the maximum mark.
  • Connect the power cable between the Brother HL-L6200DW and the power outlet. Turn it on.
  • Choose a language of your choice by navigating to the General Setup menu.
  • Download & Install Brother HL L6200DW Driver on your system and connect it to the printer.
Brother HL L6200DW Driver

Brother HL L6200DW Driver Download

  • The driver can be downloaded from the official site. Key in the correct OS Family and the OS version in the Downloads page.
  • Tap the Download button near the suitable driver file.
  • Proceed to the Brother HL L6200DW Setup and installation process once the download is over.

Brother HL L6200DW Driver for Windows 10

  • Make sure you to downloaded the full driver package to your system.
  • Access the downloaded location and double-click on the
    HL L6200DW Driver Setup file to launch it.
  • In the Security Warning window, click the Run button.
  • Wait till it decompresses and then select the Yes option in the User Account Control window.
  • Choose a language from the Select Language drop-down list.
  • Next, wait until the Brother HL-L6200DW Printer is being prepared for Brother HL L6200DW setup.
  • Read the terms and conditions displayed on the License Agreement screen and then comply with it.
  • Select the Setup Type as Standard or Custom by highlighting the checkbox near it.
  • Tap Next, and the Brother HL-L6200DW Driver will be installed on your computer.
  • On the next screen, the requirements needed for the connection process will be displayed.
  • Make sure to connect the printer via a Wired or Wireless Network.
  • After you connect them, restart your computer.
  • Once the computer turns on, delegate a print job to the printer and check if you have completed the connection process successfully.

Brother HL L6200DW Driver For Mac

  • Make sure to Download Brother HL L6200DW Drivers for Mac on your system. Double-click to open it.
  • Select the Brother Drivers package option by double-clicking it in the next window
  • Go through the Software License Agreement and then agree to it by clicking the Continue option.
  • Choose the disk where you want to install the printer driver.
  • Tap Continue and enter the administrator username and password.
  • Wait patiently until the Brother HL-L2600DW Printer Driver is installed on your printer.
  • Next, go to System Preferences and select the Print & Fax option.
  • Click the + symbol to add your Brother printer. Key in the IP address of your printer.
  • Specify a name for your Brother HL-L6200DW printer and click the Add button.
  • Make sure that you have loaded papers in the input tray of your
    Brother printer. Assign a print job to ensure a proper connection.

Brother HL L6200DW Manual

The printer manual covers basic information from the initial Brother HL L6200DW Setup method to troubleshooting. Usually, the user guide or manual is provided with the printer.

  • If you have lost the manual, then you can download the PDF file for your Brother HL L6200DW Printer User Manual from its official site.
  • To download the user manual from the Brother printer’s official site, open a web browser on it.
  • Visit Brother Printer Web Connect to know much about the Printer Web Connect.
  • Type the Brother printer model name or the URL code of the Brother HL L6200DW printer manufacturer in the search field tap the Enter key on your system keyboard.
  • If you have entered the URL code of the Brother printer, then you will be directed to the Brother printer’s official site.
  • Choose your place of residence, type the printer model in the search bar, and select the Manuals tab. Download the user manual file by selecting it and follow the on-screen instructions.
  • If you have the entered the Brother printer model keyword, then choose the official site of the printer.
  • Once the user manual is downloaded successfully on your system, open it, and start utilizing it as per your need.
Brother HL L6200DW manual

Brother HL L6200DW Toner

The Brother HL L6200DW printer Supports only black toner, and it is capable of printing 3000 pages. Insert the toner correctly on your system and try to perform a print operation. If any toner issue arises on your Brother HL L6200DW printer, then you can replace it to fix the issue.   

Brother HL L6200DW Replace Toner

To know how to replace the Brother HL L6200DW Printer Toner, follow the instructions given below.

  • Get a new toner cartridge from the manufacturer's site or a trusted retail store to begin the replacement.
  • Press the Power button on the HL L6200DW Printer control panel to turn it On.
  • After that, with the help of your hands, remove the front cover of the printer.
  • You can find the toner cartridge and drum unit assembly inside the printer, slowly, take it out.
  • Remove the defective toner out of the printer and send it to the manufacturers for recycling.
  • Now, you can unpack the Brother HL L6200DW Setup, & install toner cartridge that you brought from the manufacturer's site or a trusted retail store.
Brother HL L6200DW toner
  • Push down the new toner cartridge into the assembly until it clicks correctly.
  • After placing the new toner cartridge into the assembly, make sure to clean the drum unit by sliding the tab left to right and right to left.
  • Place the assembly into the Brother HL L6200DW Printer and close the front door.

Brother HL L6200DW Wireless Setup

To set up your Brother HL L6200DW Printer on a wireless network, follow the instructions given below.

  • Gather the SSID and password or network key of your wireless network.
  • Switch on your Brother HL L6200DW printer.
  • Using the Up arrow keys, select the Network option from the menu list, and press the OK button to confirm the selection.
  • Choose the WLAN option from the Network list and press the OK button.
  • Select Setup Wizard OK WLAN enable On
  • If you are registering your wireless network for the first time on your Brother HL L6200DW printer, then you will be prompted to enter the router credentials such as username and network key.
  • Enter the essential information in the given field and press the OK button
  • Your Brother HL L6200DW printer is connected to the wireless network.
  • Now, insert the Brother HL L6200DW Printer Driver Installation CD into the computer, start the install process.
  • After completing the Brother HL L6200DW Setup & Installation, try a test print to check the printer functions
Brother HL L6200DW wireless setup

Brother HL L6200DW Troubleshooting

The common print-related problems with the Brother HL L6200DW printer are printing blank pages, poor print quality, paper jam, and cannot print error. It is recommended not to use third-party toner cartridges, drum unit, or toner as the print quality and the Brother HL L6200dW printer’s performance will be affected.

Brother HL L6200DW Printing Blank Pages

  • First, check whether the Brother HL L6200DW Printer is printing correctly. Situate the document to be scanned on the scanner glass of your Brother HL L6200DW printer.
  • Perform a copying or scanning function on your Brother HL L6200DW printer. If the scanned or copied page is not blank, then the problem is with the software of your Brother HL L6200DW printer.
  • Proceed with the following steps to rectify the ‘printing blank pages’ error when you find the Brother HL L6200DW Setup problem is caused due to the printer driver or software.
  • On Windows 10, open the Printer Properties window, and select the Advanced tab.
  • Select the PRINT PROCESSOR button and then click the WINPRINT option.
  • Go to Default Data, choose the RAW option, and click the OK button.
  • Remove the checkmark next to the ‘Keep printed documents’ option and then click the Apply button.
  • Select the General tab, click the PRINT TEST PAGE to print the page, and then check whether the error is rectified.
  • If not, delete the existing Brother Printer Driver For Windows 10 and then re-install the updated version from the manufacturer site.
  • If the problem is with the hardware of the Brother HL L6200DW, follow the steps below to resolve the ‘printing blank pages error.

  • Separate the toner cartridge and the drum unit and then clean it.
  • After cleaning, re-install the toner cartridge inside the drum unit.
  • Make sure to close the front cover of the Printer properly.
  • You need to print a test page to check whether your Brother HL L6200DW Printer prints blank pages.
  • If so, turn off the Toner Saver Mode to Fix Brother HL L6200DW printing blank page error.

Brother HL L6200DW Poor Print Quality

Follow the troubleshooting steps below to improve the print quality of the Brother HL L6200DW Printer.

  • Make sure to use a standard paper type like plain paper, colored paper, thin paper, recycled paper, thick paper, or letterhead.
  • It is mandatory to use the genuine cartridge of your Brother HL L6200DW Printer. If not, it will affect the print quality of the printed page. Do not use curled, wrinkled, or wavy paper for printing.
  • You need to clean the drum unit to improve the print quality of the Printer.
  • Ensure that the Brother HL L6200DW Printer is turned off and then adjust the green lock lever to take out the toner cartridge from the drum unit.
  • Clean the drum unit using a dry cotton swab and then place the toner cartridge back into the drum unit properly.
  • After closing the front cover of the Brother Printer to Print a test page.
  • If you are not able to resolve the Brother HL L6200DW Set-up error after cleaning the drum unit, you need to replace it.
  • Once you finish the drum unit replacement, hold the OK button to view Drum Unit on the control screen of the Brother HL L6200DW Printer.
  • Press the OK button on the Drum Unit screen and then use the Up arrow key.
  • It will help you to Reset Brother HL L6200DW Drum Unit.
Brother HL L6200DW Paper Jam

Brother HL L6200DW Paper Jam

Perform the following steps to remove the jammed paper,

  • First, pull out the MP tray fully from the Brother printer.
  • Then, check any paper inside the tray, if so, find the paper and make sure that you remove it.
  • Next, try to clean the paper stack to remove any dust and replace it back in the MP tray.
  • Ensure that the paper stack stays below the maximum paper height as per the guidance.
  • To clear the jammed paper in the 2-sided tray,

  • First, power on the Brother printer and make sure that the printer cools down its internal hot parts for about 10 minutes.
  • Now, take out the paper tray completely out from the Brother printer.
  • Then, remove the 2-sided tray from the rear of the Brother printer.
  • Next, take the paper out from the 2- sided tray. Sometimes there can be paper stuck under the Brother printer due to some static electricity, make sure that you remove it.
  • Open the rear cover to remove the paper and remove the paper with both the hands.
  • Then, close the back door. Place the 2- sided tray and the paper tray back into the printer.
  • When the paper is jammed at the back of the Brother Printer,

  • Power on the Brother printer hl L6200DW and allow the internal hot parts to cool down.
  • Next, open the back door of the Brother printer and make sure that the fuser cover is released by pulling the green levers.
  • Now, remove the paper gently from the fuser unit.
  • Make sure there are no paper pieces left inside the printer. Close the fuser cover and the back door.

Brother HL L6200DW Can’t Print

Check with the following steps, if the Brother HL L6200DW is not printing,

  • First, make sure that the Brother Printer is switched on.
  • Then, verify whether the Brother printer is correctly connected to its system.
  • Ensure that the paper settings match with the settings for the rear tray.
  • Make sure that the output tray is in its correct position.
  • Then, check whether you have chosen the correct printer before you start with the Brother HL L6200DW Set up printing process.
  • Restart the computer that is connected to the Brother printer, and try printing.
  • Make sure that there is a safe connection between the Brother printer and the access point or the router.
  • Ensure that the Brother Printer Driver is properly installed. Try reinstalling the driver.
Brother HL L6200DW Troubleshooting

If you still found hard to have Brother HL L6200DW Setup. Feel free to contact us.