Brother Hl l2321d Setup

Brother Hl l2321d Setup

Brother Hl l2321d Setup

You can follow these guidelines to the Brother HL 2321D setup.

  • Open the Brother HL 2321D box and take the components out of it.
  • Ensure that these Brother printer components are inside the box. This includes the Brother drum unit, AC power cable, quick Brother Hl l2321d setup guide, inbox/starter toner cartridge, CD-ROM, and product safety guide.
  • Once these components are set aside, take the brother HL 2321D printer out of the box carefully.
  • Peel off the tapes covering the Brother HL printer and remove the plastic films as well. Lower the Brother printer’s front door and pull the orange part out of the printer.
  • Locate the toner cartridge slot. Take the Brother HL 2321D printer’s toner cartridge out of the packaging. Detach the orange component from the toner cartridge and then install the cartridge in its slot.
  • Pull out the Brother HL 2321D printer’s paper tray and load paper sheets. Move the paper width guides to accommodate the paper sheets. Move the Brother printer’s paper width guides again to secure the paper sheets.
  • Attach the Brother HL 2321D printer’s power cable to the power port and the wall power outlet.
  • Power on the Brother printer and wait until it initializes. Download the Brother HL 2321D printer driver on your computer from the manufacturer’s site or insert the driver CD into your computer.
  • Launch the Brother HL printer driver installer and follow the on-screen prompts. When you see the ‘Connect the machine’ screen, attach the USB cable to the Brother printer and computer. Then, carry out the rest of the prompts until the Brother printer driver installation is completed.

Brother HL L2321D Driver

The Brother printer driver helps you establish a connection between the Brother HL 2321D printer and your computer. By using the Brother HL 2321D driver, you can execute print functions such as single-sided and duplex printing. The resolution that this printer achieves is a stunning 2400*600 dpi. To download the Brother HL 2321D printer driver, navigate to the Support page of the manufacturer and select the region. Then, choose the Downloads option, enter the Brother printer model, and then download the Brother printer driver on your computer.

Brother HL L2321d Driver Download For Windows 7

The Brother HL 2321D printer driver for a Windows 7 computer can be downloaded by following these steps. Navigate to the manufacturer’s Support page, choose the region, and select Downloads. Select the Monochrome printer option and then choose the Brother HL 2321D printer from the list. Choose the OS family and OS version, and click OK. Then, download the HL 2321D printer driver from the page by clicking the Download button.

Brother hl 2321d Printer driver MAC

  • Brother HL 2321D printer drivers are available for Mac system in the official site.
  • In the Downloads page, specify the OS Family and the OS Version. Tap OK.
  • From the Results page, click the Download button available near the suitable driver file.
  • Wait till the download procedure is over and then go to the Brother Hl l2321d setup and installation process.

Brother Hl l2321d Laser Printer with Duplex Printing

  • Follow the below-stated steps to print on both sides of the paper.
  • Go to the Basic tab and find the 2-Sided/Booklet option.
  • Select the 2-Sided option from the drop-down list.
  • Four binding options are available for the Portrait and Landscape Orientation method: Long Edge (Left), Long Edge (Right), Short Edge (Top), Short Edge (Bottom).
  • Choose any one and tap the OK button. Next, select the Left Binding or the Right Binding option.
  • Click OK and then tap the Print option. Your document will be printed according to the settings you saved.

Brother HL 2321D Toner or Brother HL L2321D Cartridge

  • The Brother HL 2321D printer makes use of a black toner cartridge to print.
  • It can print up to 2600 pages, and it is provided to you at the time of printer purchase.
  • To install the ink cartridge. You have to take out the drum unit.
  • Unpack the new toner cartridge from its packet. Remove the orange protective cap from the toner cartridge.
  • Place it firmly in the drum unit, Brother Hl l2321d setup and install the drum unit in the printer.

Brother Hl l2321d Toner Reset

Perform the steps below to reset the Brother HL 2321D printer.

  • On the Brother HL 2321D Printer control panel, hold the Power button to turn off the Brother printer.
  • After a few minutes, press the GO button in a downward direction to turn on the Brother HL 2321D printer.
  • Hold the GO button and release it after the Toner LED, Drum LED, and Paper LED stops to blink.
  • Now, press the GO button for 9 times.
  • Check the Wi-Fi LED, it will blink and then again press the GO button for approximately 5 times to reset the Brother HL 2321D printer’s toner.
brother-hl-toner-reset

Brother HL L2321D Troubleshooting

The common problems occurring with the Brother HL 2321D printer are paper jam error, printer not printing, printing blank pages, printer goes offline, printer’s toner light stays on for long time problem. You can get the solutions for various Brother HL 2321D printer problem in the FAQs & Troubleshooting page of the Brother product. Otherwise, perform the quick steps below to resolve the common Brother Hl l2321d setup issues of the printer.

Brother HL L2321D Paper Jam

  • To clear the paper jam issue on your Brother HL L2321 D printer, go through the troubleshooting instructions given below.
  • The areas where there is a chance for the paper jam to occur are drum unit & toner cartridge assembly, back & front cover, and duplex unit.
  • First, check if any paper is jammed inside the drum unit & toner cartridge assembly.
  • Open the front cover of the Brother HL L2321 D printer. Slowly, take the assembly out of the Brother printer and check if any paper is jammed inside it.
  • If yes, then try to remove the jammed paper out of the Brother HL L2321 D printer using your hands. Make sure not to tear the jammed paper while removing it.
  • After removing the jammed paper, replace the assembly and close the front cover of the Brother HL L2321 D printer.
  • Now, pull the paper tray and check if any particle is stuck inside it.
  • If you find any paper stuck inside the tray, remove it from the Brother HL L2321 D printer slowly.
  • Similarly, open the back & fuser cover of the printer and check if any paper is jammed. Try to remove the jammed paper using your hands.
  • After removing all the jammed paper from the Brother HL 2321 D printer, try a test print.

Brother HL L2321D Not Printing

  • To resolve the Brother HL L2321 D printer not printing issue, perform the steps given below.
  • If you can't perform the Print operation from your computer to the Brother printer setup, then first, check the status of your printer.
  • Check and make sure that the Brother HL L2321 D printer is turned On and there no error messages displayed on the printer screen.
  • If displayed, then try to identify the error message and perform the related troubleshooting steps to fix the issue.
  • Disconnect and reconnect the power cord to the Brother HL L2321 D printer.
  • Check and make sure that the Brother HL L2321 D printer is installed on your system. Cancel all the on-going print jobs and try to perform the print operation after a while.
  • Uninstall and reinstall the Brother HL L2321 D printer driver software on your computer.
  • If you can’t find the solution for your Brother printer issue, then contact our technical experts who will assist you in fixing the Brother Hl l2321d setup issue.

Brother HL l2321d Printing Blank Pages

  • First, make sure that the brother printer hl l 2321d is active. Load a document on the Automatic Document Feeder on the Brother printer.
  • If the brother printer starts to print the copy, proceed to the next step.
  • Check this by adjusting the printer driver.

For Windows,

  • First, make sure that you open the printers folder by selecting the version on your Windows computer.
  • Next, go to the Printer’s properties. Give a right-click on the Brother printer and then select the Properties option.
  • Then, click the Advanced tab and proceed to click the Print Processor button.
  • Select the Winprint option from the print processor.
  • Next, choose for the Raw option from the Default Data Type and then click OK.
  • Now, uncheck the Advanced tab option.
  • After unchecking, click on the Apply option.
  • Under the general tab, find the Print test page option and click it.
  • If the Brother Hl l2321d setup problem persists, then go to the next step.
  • Now, try to uninstall and reinstall the Brother MFL-Pro software suite.
Brother Hl l2321d toner

To uninstall,

  • First, close all the applications. Check if you are logged in with administrator rights.
  • Then, tapStartAll programsBrother Brother utilities.
  • Now, choose the model from the displayed list.
  • Next, go to the Tools option and then click Uninstall. Click OK to proceed with the uninstalling process and once it is done, restart the computer.
  • Next, reinstall the software from the manufacturer’s website.
  • Print a sample to check whether the Brother Hl l2321d setup issue has been solved.

For Macintosh

  • First, search for the System preferences from the Apple menu. Next, find the Printers and Scanners icon in the Hardware section and click it.
  • Now, make the Brother printer that you want to delete visually prominent.
  • Under the Printers section, click the -minus button to delete the printer.
  • Then, you can confirm by clicking OK to the Printer you want to be deleted.
  • Now, underneath the printers section, click the + plus button.
  • Next, click the Default icon on the top of the window.
  • Now, a list of printer names will be displayed, select your machine.
  • Ensure that you have selected the CUPS driver from the print using list. Once you click the Add option, the driver will be shown in the list.
  • Proceed to print by closing the list.

Brother HL l2321d Goes Offline

  • Make sure that the Brother machine is switched on and there areno errors on the display.
  • Ensure that the printer is connected to the computer. Check if the Brother HL 2321d is set as the default printer. Follow the guidelines below to set the printer as default printing source.
  • First, open the Control Panel window on your Windows computer and then select for the Hardware and Sound option. Under that, select the Devices and Printers option.
  • Next, try to delete all the printing jobs from the Devices and Printers.
  • Click the Brother printer icon, See what’s printing -> Printer -> Cancel all documents.
  • Check the printer status, whether it is online or offline.
  • Now, make sure that the Brother printer is working or not. First, turn on the printer. Let the printer become silent.
  • Then, on Windows 8, go to the Control Panel window and click the Hardware and Sound -> Devices and Printers.
  • Hang on the cursor till the printer status pop-up.
  • If the pop-up show that the Printer is ready, then the driver is working properly.
  • On Mac, go to the Apple menu, choose the System Preferences option -> Print & Scan.
  • Next, make sure to select the correct printer model name.
  • If the AirPrint driver is being used, add the CUPS printer to the Brother Hl l2321d setup Mac.
  • Then, click the Default icon in the dialog box.
  • Select the printer name from the list.
  • Then, verify that the model name + CUPS is chosen.
  • Now, click Add, and you can see the printer displayed in the list.
  • Under the Apple menu, select the Quit System Preferences option.

Brother HL l2321d Toner Light Stays On

  • First, power off the Brother printer and then open the front cover.
  • Now, press the Go button on the Printer and alternatively turn the Printer ON.
  • Once all the lights are ON, press the Go button twice.
  • When all the toner, drum, error lamps light up, press the Go button five times.
  • After this, the toner, drum and the Brother Hl l2321d setup error lights will turn off and the Ready light turns ON.
  • If this happens, then close the front door of the Brother printer and then start the Printer.