Quick Guide - Brother HL3140CW Wireless Setup

Brother HL3140CW Wireless Setup

Brother HL3140CW Wifi Setup

Brother HL3140CW is a compact LED color printer enhanced with wireless networking capability. The wireless connection makes printing easier and faster.The steps to successfully establish the Brother HL3140CW Wireless Setup are as follows:

Before setting up the Brother printer over the wireless network:

1. Make a note of the networking credentials, including the network name (SSID) and password from the router.

Brother HL3140CW Wireless Network Connect:

  • Connect the power chord between the printer and an electrical socketand turn on the printer.
  • Using the control panel on your printer, select Network >OK.
  • Select WLAN and pressOK.
  • Select Setup Wizard and pressOK.
  • The Enable WLAN? message appears on the screen. Choose Enable.
  • The Wireless setup wizard screen appears and the setup process starts.
  • The printer will scan for the available networks and display the names of the networks that are available.
  • Select the SSID of your router among the networks displayed.
  • If your authentication is encrypted, enter the network password.
  • If the authentication is an open system and does not ask for the password, press OK.
  • The connection is established successfully and the message Connected is displayed on the screen.
Brother HL3140CW Wifi Setup

Brother HL3140CW Software Installation:

Install Brother HL3140CW Driver after completion of the wireless connection. The Brother HL3140CW Installation steps are as follows:

  • Visit the official Epson support page of your printer.
  • Enter your product name.
  • Click the Downloads tab.
  • Select the OS family and OS version using the radio buttons.
  • Select the Full software package option.
  • Click the Agree to EULA and download tab and download the printer driver.
  • Run the downloaded installer.
  • Carry out the instructions on the screen and complete the installation.
  • While installing the printer driver, you will see the connection screen. Select the Wireless option as the connection type.
  • Complete the driver installation and print a test page.

Brother HL3140CW Wireless Setup Using Wi-Fi Direct:

For this Brother HL3140CW Wireless Setup, you don’t need a wireless router or access point.

  • Using the control panel in your printer, select Network.
  • Select Wi-Fi direct and press OK.
  • Select Manual and press OK.
  • The network name and password will be displayed on the screen.
  • Now, go to your wireless device and turn n Wi-Fi.
  • Search for the printer’s SSID.
  • When prompted, enter the Wi-Fi Direct password.
  • Install the printer driver on your device and add your printer.
  • Now, you can print wirelessly using Wi-Fi Direct.
  • If you still face issues on Brother HL3140CW Wireless Setup, feel free to contact us.