Brother HL 2270DW Setup

Brother HL 2270DW Setup

Brother HL 2270DW Unboxing Setup

Follow the quick steps to set up the Brother HL 2270DW printer.

  • Remove the packing material from the machine and make sure that you have all the components like quick setup guide, safety booklet, installation CD, power cord, drum unit, and toner cartridge assembly.
  • Remove the tape and also the silica gel tape from the machine.
  • Open the front cover of the printer.
  • Lift the elastic band and pull the paper strip out of the printer.
  • Lift the drum unit and toner cartridge assembly out of the printer.
  • Now shake the printer to distribute the toner.
  • Re-insert the drum unit and toner cartridge into the printer.
  • Close the front cover of the printer.
  • Pull the paper tray from it.
  • Remove the paper from the output paper tray and make sure that you do not have any small piece of paper to avoid the paper from jamming.
  • Now, load enough plain paper in the paper tray.
  • Make sure that you fit the paper correctly in the paper tray.
  • Connect the power cord to the printer.
  • Turn on your printer.
  • The Ready LED will stop blinking, and the green light will start to glow.
  • Press the Go button to print the test page. Check the test page report and make sure that the printer is printing correctly without any Brother HL 2270DW Setup issue.

Brother HL 2270DW Driver Download

  • Go to the official website of brother printer.
  • Select the Operating System family and Operating System version from the list and then click Search.
  • Click the Printer driver option from the Drivers section.
  • The printer driver page will appear on the screen.
  • Read the End-user License agreement and agree to the Eula and Download option.
  • Once the download is over, run the downloaded program and follow the instructions displayed on the screen to install the driver of brother printer.
  • Follow the steps to download the Brother HL 2270DW printer driver automatically.
  • Download Driver Easy.
  • Go to the Scan option from the left panel of the screen and click Scan Now to run the program.
  • Go to the Update option below the Scan option on the left side of the panel.
  • A new window will open, click the Update option next to the printer name to download the correct version for your printer.
  • Now, restart your computer to complete downloading the printer driver.
Driver Download

Brother HL 2270DW Wireless Setup

To configure wireless network using WPS or AOSS, follow the instructions below.

  • Set the range of the brother printer within the range of WPS or AOSS access point.
  • Connect the data cable or power cord to your printer.
  • Turn on your printer.
  • Go to WLAN access point and hold the WPS or AOSS button.
  • Press and hold the Wireless Setup button at the back side of your printer for 2 seconds.
  • Make sure that you will not hold the button for more than 2 seconds. Use the point objects like ballpoint pen to press the button.
  • The toner LED will blink to denote that the printer is searching for a WLAN access point.
  • When the printer connects to an access point, toner and drum LEDs will blink.
brother-hl-2270dw-wireless-setup
  • Once the connection is complete, Ready LED will glow for 5 minutes to confirm the connection.
  • Check the WLAN report for any error. If the report shows any Brother HL 2270DW Setup error, the wireless setup is canceled. The wireless setup is completed when there is no error in the report.

Brother HL 2270DW Toner

High capacity toner consumes approximately 2600 pages in accordance with ISO. Make sure that you insert the toner cartridge properly into the tray. Else, it will lead to a printing problem. Make sure that you always use genuine toner cartridge to replace the old toner cartridge. The amount of toner varies according to the print density settings. Toner is used to improve the print quality of the printed paper

Brother hl 2270dw Toner Refill

Follow the steps to refill the toner using an ink owl toner.

  • Open the front cover of the printer.
  • Take the toner cartridge out of the printer.
  • Remove the cap and empty the old toner from the toner cartridge.
  • Use the vacuum to remove any dirt material in the toner cartridge.
  • Remove the screw and rotate the gear.
  • Once you turn the gear by 180 degrees, insert the screw back to its original position.
  • Refill the new toner into the toner cartridge and vacuum it.
  • Gently shake the toner cartridge to distribute the toner.
Brother HL 2270DW toner

Brother laser printer HL 2270DW Toner Replace

Before you replace the toner, make sure that you separate the cartridge from the drum unit. Do the instructions below to replace the toner.

  • Open the front cover of the Brother printer and also open the toner cartridge door.
  • Pull the old toner cartridge and drum.
  • Then, remove the toner cartridge and drum unit from the tray.
  • Gently shake the new cartridge to distribute the toner.
  • Remove the protective cover around the toner cartridge.
  • Insert the new toner cartridge into the drum unit and make sure that you fit the toner properly. You will hear the sound when you place the toner cartridge correctly.
  • Insert the drum into the toner cartridge tray.
  • Once you place the new cartridge and drum into the cartridge tray, close the cartridge door.
  • Close the front cover of the printer.

Brother HL 2270DW Envelope Printing

Follow the instructions below to print on an envelope.

  • Open the back cover of the Brother printer.
  • Pull down both the green levers.
  • Open the manual feed slot cover to feed the envelope.
  • Place the envelope in the manual feed slot and make sure that the front edge of the envelope touches the paper feed roller.
  • Ensure that the envelope is straight and you properly fit it into the slot. Do not put more than one envelope at a time in the manual feed slot.
  • As per your requirement, change the paper size, media type, and paper source from the list given on your printer.
  • Print the data.
  • Once you complete printing, press the green lever.
  • Use this paper feed method to print on envelope Brother HL 2270DW Setup.

How to Connect Brother HL 2270DW Printer to Wifi?

Follow the instructions to connect the Brother HL 2270DW printer to Wi-Fi.

  • Plug the power cord to your printer.
  • Turn on your printer and wait for the Ready LED to glow.
  • Use pointy objects like ballpoint pen to press the Wireless Setup button that is located at the backside of the printer for three seconds.
  • Make sure that you will not press the button for more than three seconds.
  • The printer will print a page which contains an 8 digit pin.
  • Now, it will search for a WLAN access point.
  • Enter the IP address of the device on your computer browser. It is used as a Registrar.
  • Go to the WPS setting page and enter the 8 digit pin in the registrar.
  • Proceed with the guidelines displayed on the screen to complete the Brother HL 2270DW Setup network connection.