Brother Dcp T220 Troubleshooting

Brother Dcp T220 Troubleshooting

Troubleshooting techniques enable us to manage the ongoing issue to some extent. If you encounter an issue with your Brother DCP T220 printer, continue to read the following sections. In this article, we have explained the common problems that may occur on your printer, and we have also given appropriate troubleshooting techniques to fix those issues on your own.

Brother Dcp T220 Troubleshooting

Brother DCP T220 Printer Not Connected

  • When the communication between your printer and computer is lost, you will end up with the “printer not connected” error code.
  • If you have connected your printer and computer over a network, check whether the Internet connection is strong enough. If there is some problem with the Internet connection, fix it first and check whether the issue is resolved. Also, check whether you have connected your printer to the same network to which your computer is connected. If you have connected them to different networks, you will end up in trouble.
  • If you have connected your printer and computer using a USB cable, check whether the USB cable is connected securely onat both ends. Disconnect your USB cable from both ends and reconnect it between your printer and computer. Then, check whether the issue is resolved.
  • Power cycle your printer. When your power cycle your printer, you can fix most of the potentials issues. To do so, turn off your Brother printer and let it stay undisturbed for a minute. Then, turn on the printer and check whether the issue is resolved.

Brother DCP T220 Printer Offline

  • A printer may go offline due to various reasons. But when you diagnose the exact cause behind the error code, you can fix it without much effort. Try out the troubleshooting techniques mentioned below to fix the printer offline issue.
  • If your printer goes offline, it might be due to an unstable Internet connection. Thus, fix it first and then check whether you can find your printer online.
  • If you have enabled the Use Printer Offline option, you must disable it. To do so, click Start and go to the Devices and Printers section. Locate and right-click on your Brother DCP T220 Printer and choose See what’s printing. Click on the Printer menu and disable the Use Printer Offline option; then, check whether you can find your printer online.
  • It is crucial to set your Brother printer as the default one. In case you have set a different printer as the default, your Brother printer will not receive the print jobs you send from your computer. To set your printer as the default machine, navigate to the Devices and Printers section. Right-click on your Brother printer and choose the Set as default printer option.

Brother DCP T220 Not Connect to Wi-Fi

  • If you have connected your printer and computer over a network, check whether you have entered the correct credentials. Make sure that you have connected your computer and printer over the same network.
  • Whatever the problem would beis, a simple power cycle may fix themit efficiently. To do so, turn off your Brother printer and unplug the power cord. Let it stay undisturbed for a minute. Reconnect the power cord to your Brother printer and turn it on. your printer.Now, check whether you can find your printer online.
  • Restarting the computer also can help you to some extent to fix the issue.
  • An outdated printer driver may cause significant issues on your printer, so update the printer driver and then check whether you have resolved the issue.
  • At times, removing and re-adding your printer can help you fix the printer not connecting to the Wi-Fi issue. To remove your printer, go to the Devices and Printers section. Right-click on your printer and choose the Remove Device option. Now, go to the Devices and Printers section again and click on the Add a printer option. Follow the instructions and re-add your printer. Then, check whether the issue is resolved.

Brother DCP T220 Not Printing

  • Check whether your Brother DCP T220 printer is in power off mode. If it shows you any error messages like paper jam or toner empty, fix the issue first.
  • It is essential to keep your printer as the default one. If not, your Brother DCP T220 will not receive the print jobs you printsend from your computer.
  • To make your printer the default one, go to the Devices and Printers section, right-click on your printer, and choose the Set as default printer option.
  • Uninstall the printer driver from your computer. Go to the official support page of Brother and download the updated printer driver. Now, install the updated printer driver on your computer by following the instructions on the screen.
  • When the print jobs get piled up on your printer’s memory, it may fail to print the documents. In that case, it is recommended to cancel all the documents from the queue. Go to the Devices and Printers section to cancel the documents, right-click on your printer, and choose the See what’s printing option. Then, click on the Printer tab and choose the Cancel All Documents option.

Brother DCP T220 Paper Jam

Brother DCP T220 Paper Jam
  • If there is a paper jam on your Brother printer, an error code will be displayed on your printer control panel. It will also show you the exact area where the paper jam has occurred. Thus, locate the specified area and remove the jammed paper gently.
  • When there is a paper jam inside the printer, disconnect your printer from the electrical socket and extend the paper tray completely from the printer.
  • Gently take out all the jammed paper from the printer. Open the jam clear cover by pushing it down. Now, slowly pull out the jammed paper and close the jam clear cover. Make sure that you have completely removed the jammed paper from the printer.
  • Now, insert the paper tray into the printer and reconnect your printer. Similarly, you can remove the paper jams from different areas on your printer. control panel.
  • To prevent paper jams, always load fanned and aligned sheets into the paper tray. Do not load any damp or curled paper; if you do so, paper jams can easily occur on your printer. Always make sure not to load the sheets beyond the indicated limit. When you follow all these measures, you can prevent paper jams to some extent.

Brother DCP T220 Scanner Not Working

  • If the scanner of your Brother DCP T220 printer is not working, you need to check whether there is a paper jam inside the scanner unit. If you find any jammed paper, take itthem out gently and check whether the issue is resolved.
  • If your printer shows any error codes, you need to fix them before going ahead with the next set of troubleshooting techniques.
  • Restart your printer. Turn it off and leave it undisturbed for a minute. Then, turn on your printer and check whether the issue is resolved.
  • In most cases, a scanner may fail to work when there is an issue with the scanner driver. Thus, uninstall the scanner driver and reinstall it on your computer.
  • If your printer driver is outdated, you need to update it with the recent version. You can get the updated version from the official support page of Brother.

Brother DCP T220 Printing Blank Pages

  • In most cases, the environment plays its part. Check the humidity and temperature of the room where your printer is kept. Let your printer come to room temperature and check and then check whether your printerit can print normally.
  • If the ink tanks are empty, you need to refill the tanks immediately. In case you fail to do it, you may end up with blank pages.
  • Whenever necessary, your printer automatically cleans theits print head. of your printer. If you prefer to clean the print heads manually, press the Stop and Copy buttons simultaneously. The Power, Warning, and Ink LEDs will light up for a second. Then, the ink LED alone will blink. If you want to clean all the colors, press Color Start. In case you prefer the black print head alone, press Mono Start.
  • As previously mentioned, a printer driver may cause more significant issues. Whenever your printer driver goes outdated, update it for the proper functionality of your printer. You can get the updated printer driver from Brother’s official website.