Brother DCP T220 Driver Installtion Procedure

Brother DCP T220 Driver Install

Brother DCP T220 Driver For Windows 10

The driver for your Brother printer is available on the CD-ROM that is provided along with the printer package during the first-time purchase. The driver should be installed on your computer because it is responsible for the communication between your computer and printer. If the CD-ROM is not available, you can download the driver for your printer by clicking the Driver Download button on this page. Alternatively, you can get it from the official Brother site. For detailed instructions about downloading the Brother DCP T220 Driver from the official site, go through the steps given below.

Before Starting:

  • Disconnect the USB cable connecting your printer and Windows computer, if any.
  • Remove any previously installed Brother printer drivers.
  • Close all the running programs and verify if the Internet connection is stable.

Downloading Printer Driver:

  • Open the default browser and visit the official Brother site.
  • Type your printer’s model number in the search field and click the Search button.
  • Click the printer model in the search result.
  • Select the option that directs you to the driver download page.
  • Click the Downloads tab from the left-side panel and select your Windows version in the Select Your Operating System (OS) section.
  • Click OK and select the required Brother DCP T220 Driver from the displayed list.
  • If prompted, click the Agree to the EULA and Download button and save the driver file to your computer.

Installing Brother DCP T220 Driver:

  • Start by navigating to the Downloads folder or the location where you have saved the driver file.
  • Open the downloaded driver file and extract it.
  • Double-click the setup file to begin the driver installation.
  • If your device prompts for User Account Control, click Yes.
  • Agree to the EULA and follow the on-screen instructions in the driver installation wizard to complete the setup.

Step 4: Install Printer Driver

  • To complete the Brother HL-L2366DW printer setup, you have to install the printer driver on your computer.
  • During the driver installation, choose the desired connection and perform the prompts displayed on the screen to install the printer driver.
  • Configure the printer settings by following the on-screen instructions.
  • After installing the printer driver on your computer, print a test page to check whether the setup is done correctly.

Brother DCP T220 Driver For Windows 8

  • On your Windows 8 computer, open the default browser and go to the official Brother site.
  • Input your printer’s model number in the search field and click the Search button.
  • Select the printer model in the search result and click on the link that takes you to the driver download page.
  • Under the Select Your Operating System (OS) section, select Windows in the Select OS Family column.
  • Below Select OS Version, choose your Windows 8 version.
  • If you don’t know the exact version of OS running your computer, click on the How to identify your Operating System (OS) link and follow the on-screen instructions to identify your OS version.
  • Click OK and then select the required Brother DCP T220 Driver from the displayed list.
  • Next, click the Agree to the EULA and Download button.
  • Wait until the download is completed.
  • Go to your computer’s Downloads folder and double-click the downloaded driver file.
  • Run the driver setup and follow the on-screen prompts to complete the setup.

Brother DCP T220 Driver For Windows 7

Before starting:

  • Verify if you have completed the basic printer setup.
  • Check if you have a stable Internet connection on your Windows 7 computer.
  • Click the Start menu and type ‘winver’ in the search panel. Hit the Enter key to run the command and open the About Windows window.
  • Identify the Windows 7 version running your computer.
  • Close all the running programs and disable any active antivirus software.

Download & Install Brother DCP-T220 Driver:

  • Launch the default browser on your computer and go to the official Brother site.
  • Type ‘Brother DCP-T220’ in the search field and click the Search button.
  • Click the printer model in the search field and select the link that directs you to the Brother DCP T220 Driver download page.
  • From the given options, choose your Windows 7 version.
  • Click OK and click the Full Driver & Software Package link below Full Software Package to get the most functionality out from the printer.
  • Next, click the Agree to the EULA and Download button and save the driver file to your computer.
  • After completing the download, open the driver file and run the setup wizard.
  • Finish the driver installation by following the on-screen prompts.

Common Brother DCP T220 Driver Update Procedures

The usual driver update procedure involved uninstalling the existing driver and then installing the latest driver on your computer.

Uninstalling Brother DCP-T220 Driver:

  • For Windows, click the Start menu and type ‘Brother’ in the search field.
  • Click on Brother Utilities in the search results.
  • Choose your printer’s model number from the drop-down menu and click the Tools tab from the left-side panel.
  • Click the Uninstall icon. Select Yes if the device prompts for User Account Control.
  • Carry out the on-screen instructions and remove the driver from your computer.
  • For Mac, use the Brother Uninstall Tool to remove your Brother DCP T220 Driver and all the Brother printer-related files.
  • If necessary, you can also remove them manually from the Applications folder.

Installing Latest Driver:

  • Download the latest driver for your computer from the official Brother site.
  • After completing the download, run the setup file.
  • For Windows, click Yes if the device prompts for User Account Control.
  • For Mac, enter the administrator password in the required field and click Continue when prompted.
  • Finish installing the latest driver on your computer by following the instructions in the driver installation wizard.

You have now seen the common update procedure for the Brother DCP-T220 driver.

Brother DCP T220 Driver Issues & Troubleshooting Steps

  • You may end up with the driver installation problem if you have downloaded an incompatible driver on your computer.
  • So, download a compatible driver from the official Brother site and install it on your computer.
  • If you cannot complete the driver installation, check the USB cable connected at both end ports.
  • Also, ensure that your Brother DCP-T220 printer has been turned on while installing the driver.
  • If the problem is not solved, remove all the Brother printer-related files from your computer using the Brother Uninstall Tool.
  • Restart your computer after removing all the Brother files, including the printer driver.
  • Install the latest Brother DCP T220 Driver and establish the connection between your printer and computer.
  • If the problem remains unsolved, click the Call button on this page and contact us to help you install the driver on your computer.