Brother DCP B7535DW Setup

Brother DCP B7535DW Setup


Quick steps to unbox and do Brother DCP B7535DW Setup for the first time

Step 1: Unpack the printer box

  • Open your printer box.
  • Inside the box, check if the components such as drum unit, toner cartridge, AC power cord, Brother installation disc, quick setup guide, and reference guide are provided.
  • Take all the components and the printer out of the box.

Step 2: Unpack the printer & install the drum unit and toner cartridge

  • Gently remove all the outer packing materials of your printer.
  • Open the front cover.
  • Take the drum unit and toner cartridge assembly installed inside the printer.
  • Remove the orange protective tape surrounding the cartridge assembly.
  • Place the cartridge back into the printer and close the front cover.

Step 3: Loading paper

  • Pull out your printer’s paper tray.
  • Based on the paper type that you’re going to load, adjust the tray’s width guides.
  • Load the paper correctly in the tray.
  • Move the width guides towards the paper.
  • Place the tray back into the Brother DCP B7535DW Setup.

Step 4: Turn on the printer

  • Get your printer’s power cord.
  • Plug the cord between the printer and the power outlet.
  • Turn on the printer.
  • Once the printer becomes stable and idle, configure the initial settings by following the on-screen instructions.
  • Be sure that you have configured the printer settings correctly and press the OK button followed by Stop/Exit.

Step 5: Install the printer on your computer or mobile phone

For computer:

  • Insert the setup CD or open the downloaded Brother DCP-B7535DW printer driver file on your computer.
  • Perform the on-screen prompts to reach the Select your connection screen.
  • Choose the desired connection type.
  • Install the printer driver on your computer to complete the setup.

For mobile phones:

  • Install the Brother iPrint & Scan app on your smartphone.
  • Open the app and follow the on-screen instructions to install the printer on it.
  • Finally, perform a test print or scan operation to check whether the Brother DCP B7535DW Setup is done correctly.


Save your time in downloading the printer’s user manual by clicking the Manual Download button provided on this page.


The Full Driver & Software package contains all the necessary software that is needed to perform the printer-related operations from your computer. This package is available on the setup CD provided along with the printer during the purchase.


  • To download the Brother DCP-B7535DW printer driver for Mac from this page, click on the Driver Download button provided.
  • Now, your current macOS type will be auto-detected, and the printer driver available for it will start to download.


  • Go to the Brother printer’s official support page.
  • Choose your printer model from the products list.
  • Click on the Downloads tab.
  • Make sure that your Windows OS is selected.
  • Choose the driver that you wish to install and click on the Agree to the EULA and Download button.


You can start Brother DCP B7535DW Setup over a wireless network using the printer’s control panel or the WPS method. The below section explains the wireless setup using the One Push and PIN methods of WPS.

Wi-Fi Protected Setup- One Push method

  • Initially, make sure that your wireless router has the WPS button.
  • Now, from your printer’s Menu list, select the Network option and press OK.
  • Choose WLAN > WPS > Yes.
  • Press your router’s WPS button when the message Press key on rtr is displayed on your printer.
  • Now, your printer will try to detect the wireless network available within its range and try to connect to it.
  • In the meantime, turn on your computer and download the printer driver.
  • Once your Brother printer is connected to the wireless network, make sure your computer is also connected to the same network.
  • Now, open the printer driver setup file.
  • Follow the on-screen prompts. When prompted, choose the connection type as Wireless Connection.
  • Finish the driver installation by following the on-screen instructions.

WPS- PIN method

  • From the Network menu of your printer, choose the WLAN option followed by WPS w/PIN Code.
  • Press the Yes button when the WLAN Enable? message is displayed on the printer’s LCD.
  • Now, an eight-digit PIN will be displayed on the LCD; note it down.
  • On your computer, open any browser and type the IP address of your wireless router.
  • Once you reach the router’s web access page, click on the WPS Settings option.
  • In the opened window, type the eight-digit PIN displayed on the printer’s LCD in the given field.
  • Click Apply and carry out the on-screen instructions.
  • Now, connect your computer to the same network and begin the software installation on it.
  • Once the printer driver installation is completed, print a test page to check whether the Wi-Fi setup is done correctly.
  • If the printer prints the test document successfully, it means the wireless setup is a success.


  • Get a USB cable that is recommended by the printer manufacturer.
  • Disconnect your Brother DCP B7535DW Setup from the computer if it is already connected.
  • Now, open the Brother DCP-B7535DW printer driver file and follow the on-screen instructions.
  • When prompted, choose the USB Connection option and connect your printer and the computer using the USB cable.
  • Install the printer driver by following the on-screen instructions.


  • Initially, make sure that you have an Ethernet cable to perform the wired setup.
  • Place your printer close to your router or access point and connect them together using the Ethernet cable.
  • Now, connect your computer to the same network over a wired or wireless connection.
  • Run the printer driver file from the setup CD or the downloaded driver package.
  • Choose Wired Connection when prompted and install the printer driver to complete the Ethernet setup.


Scroll down this page to know how to resolve some of the Brother DCP-B7535DW printer issues such as paper jam, printer offline, etc. To get remote assistance in resolving the same or other issues, contact our technicians by clicking the Call button provided on this page.


Usually, the paper jam can occur in the following parts of the printer.

  • Paper tray
  • Output paper tray
  • Back of the printer
  • Inside the printer
  • 2-sided tray

To resolve the paper jam error on your Brother printer, follow the below instructions.

  • Initially, restart your printer.
  • After restarting the printer, check whether the Paper Jam message is displayed on the screen.
  • If yes, then look for the jammed paper in the above-mentioned parts of your printer.
  • Remove the jammed paper slowly out of the Brother DCP B7535DW Setup if found.
  • After removing all the jammed paper, reload the paper in the tray and perform a test print to check whether the paper jam issue is resolved.


  • Initially, turn on your Brother printer if it is turned off.
  • Check whether you have configured the print preferences correctly.
  • If yes, perform the next troubleshooting step given below. Otherwise, reconfigure the print settings and print a test page to check whether the Printer Offline issue is resolved.
  • Restart your printer.
  • Make sure that your Brother DCP printer and the computer or mobile phone are connected together.
  • Check if the Use Printer Offline option is enabled on your computer.
  • If yes, disable it and then perform the print operation.
  • Reset the printer settings if the instructions didn’t help to resolve the printer offline issue.


    Basically, when the toner level becomes low or empty, the Brother printer will alert you through an error message. To resolve this issue, replace the toner cartridge with a new one. As soon as you replace the cartridge, its count will be automatically reset.

  • Get a replacement toner cartridge.
  • Turn on your printer if it is turned off.
  • Now, open the front cover of the printer and remove the empty toner cartridge.
  • Unpack the new cartridge completely. Now, insert the unpacked cartridge into its slot.
  • Close the front cover.


  • Restart your printer, computer, and wireless router.
  • If necessary, re-perform the Wi-Fi setup.
  • Check if any security software or the network setting is blocking the Brother DCP B7535DW Setup-related operations.
  • If yes, disable the security software or network settings temporarily and then perform the print operation.
  • Check if any failed print job is still listed in the print queue. If yes, delete it and then configure the new print job.