Brother Dcp 7055 Toner Cartridge

The toner cartridge used in the Brother DCP 7055 printer is Standard TN- 2010. This toner cartridge can approximately print up to 1000 pages. By default, the TN-2010 toner cartridge is built inside the Brother DCP 7055 printer. You can refill this toner cartridge if it becomes empty. The procedure to refill the TN-2010 toner cartridge is given below.

Brother Printer Dcp 7055 Toner Reset

Usually, after replacing the toner cartridge, you will be prompted to reset the toner. Begin the toner reset process as soon as the Reset Toner message is displayed on your Brother printer’s screen. To know how to reset your Brother DCP 7055 printer’s toner cartridge, perform the simple, quick steps given below.

  • Make sure to keep the front cover of the printer opened throughout the toner reset process.
  • Locate the Clear button on your Brother DCP 7055 printer’s control panel and press it.
  • Then, press the Start button. Perform the on-screen prompts displayed on the printer’s screen.
  • Press the OK button when the ACCEPTED message is displayed on your Brother printer screen.
  • Once the toner cartridge is reset successfully, close the front cover of the Brother printer.
Brother-Printer-Dcp-7055-Toner-Reset

Brother Dcp 7055 Toner Refill

To fill the Brother DCP 7055 printer’s toner cartridge, first, you need to take it out of the printer.

  • You can refer to the printer’s user manual to take the toner cartridge out of the printer.
  • You can also click the Call button available on this screen to get remote assistance in removing the toner cartridge from the printer and refilling it.
  • Get refill toner powder from a trusted retail store.
  • Now, begin the toner refilling process by following the instructions given below.
  • Remove the cap available at one of the toner cartridge and keep it aside.
  • Make sure to empty the old toner cartridge.
  • After emptying, unpack the refilling toner bottle.
  • Insert the toner bottle into the toner cartridge.
  • Make sure not to overfill the toner.
  • After filling the toner, tighten the cap of the toner cartridge.
  • Place the refilled toner cartridge into the printer and try a test print.

Brother Dcp 7055 Replace Toner Error Solution

  • When the Replace Toner message is displayed on your Brother DCP 7055 printer’s screen, follow the quick, simple steps given below.
  • First, get a replacement toner cartridge from a trusted retail store.
  • Switch on your Brother DCP 7055 printer if it is turned OFF.
  • Open the front cover of the printer.
  • Remove the drum unit & toner cartridge assembly out of the printer.
  • Take out the defective toner cartridge from the drum unit.
  • Unpack the new toner cartridges and insert it into the drum unit.
  • Place the drum unit back into the printer and close the front cover.